The third RT18 bunkering tanker "Pyatimorsk" with deadweight 526 t departed for trip to the home port of Kalach-on-Don
On 08.11.2014, RT18 bunkering tanker "Pyatimorsk" with deadweight 526 t with high ice category (Ice 30) departed for trip to the home port of Kalach-on-Don.
Vessel will be operated by FBE "Volgo-Don Inland Waterways Basin Administration".
Tanker "Pyatimorsk" (building N is 10903) was constructed by the Yaroslavl Shipyard (Svetlana Chekalova is a general director, LLE "VP FINSUDPROM" is a managing company). Vessel's keel was laid down on 10.10.2013; launching took place on 09.09.2014.
The series of three river bunkering tankers is being built for Federal State Department "Rechvodput'" of Federal Agency of Marine and River Transport of RF Ministry of Transport.
Project RT18 was designed by Marine Engineering Bureau.
New bunkering tanker is designed for receiving from the shore or another vessel, transportation, delivery petroleum products with a flash point more than 60° C to the shore or to another vessel. The transportation of diesel oil and lubricating oil (with viscosity of 50 Cst at 50°C) is provided.
Vessel's navigation area includes Russian inland waterways appropriated to the "O 2.0" area.
Bunkering tanker is a steel single-deck self-propelled twin-screw vessel with the forecastle and poop, with transom aft end, with the engine room and deck-house located aft, with double bottom and double sides, with trunk in the cargo tanks area, with fore bow thruster.
Vessel's main particulars are as follows:
Length overall is about 61.29 m;
Length between perpendiculars is 59.60 m;
Breadth overall is about 10.42 m;
Breadth (due to waterline) is 10.00 m;
Depth is 2.60 m;
Design draught is 2.0 m;
Autonomy is 15 days;
Deadweight is 517 t;
Summarized capacity of cargo diesel tanks is 526 cub. m;
Summarized capacity of cargo oil tanks is 56 cub. m;
Summarized capacity of settling tanks is 26 cub. m;
Summarized capacity of ballast tanks is 521 cub.m;
Cargo pumps capacity for diesel oil is 50 cub. m. per hour each;
Cargo pumps capacity for lubricating oils is 25 cub. m per hour each;
Speed is about 9 kn.
RRR class notation is O 2.0 (ice 30) A.
2 fixed pitch propellers and 2 full-balanced rudders are placed in the aft end in order to provide specified vessel's speed and manoeuvrability. To improve manoeuvrability at low speed, during passing the narrow waters and during mooring operations is provided by the bow thruster; it is of the "screw in the pipe" type with fixed pitch propeller with capacity of 55 kW.
Main propulsion unit consists of two diesel engines with maximum continuous capacity of 221 kW each.
Electro-hydraulic steering machine is used as steering gear.
Hydraulic crane with lifting capacity of 1.0 t and with handling radius of 12 m is foreseen for the supplying and demounting hoses, for lifting and lowering the outboard gangway, for booms installation.
Vessel's spill set is foreseen in order to prevent environment pollution in the case of cargo spillage during cargo loading operations.
Cargo system provides closed cargo receiving by shore equipment and cargo discharge by vessel's submersible pumps. The system provides cargo operations for loading and unloading simultaneously of 4 cargo varieties, e.g. two types of diesel oil and two types of lubricating oil.
Crew consists of 7 people.
Keel of the lead RT18 vessel "Tanker-3" (building No 10901) was laid on 13.03.2013. She was launched on 26.06.14 and accepted for operation on 19.09.2014.
Keel of the second RT18 vessel "Rassvet" (building No 10902) was laid on 03.05.2013. She was launched on 05.08.14 and accepted for operation on 23.10.14.
Keel of the third RT18 vessel "Pyatimorsk" (building No 10903) was laid on 10.10.2013. She was launched on 09.09.14.