News of our company

Archive of news


15.05.19 10:39
The eighth ROB20 small-draught "double-hulled" tanker barge was put into operation; the barge is built by the project of Marine Engineering Bureau

On 29.04.19 The eighth ROB20 small-draught "double-hullednon-self-propelled tanker barge "Belmax 8" was put into operation; barge is of class "O" of the "Novaya Belskaya" type (building number 4108).
Characteristics of the barge, namely 6000 t of cargo (at draught 2.75 m) while light weight is 880 t let to announce this project as an unique one.
A series of eight ROB20 tanker vessels and two RDB20 dry-cargo vessels is being built by leasing scheme for the Pola Raise shipping company (St. Petersburg); the customer (lessor) is the State Transport Leasing Company.
Prj. ROB20 is designed by Marine Engineering Bureau.
The contract for the construction of barges with operating draughts from 1.20 to 2.7 5m was signed on 31 of October 2017.
While designing the hull of ROB20 prj. with overall dimensions of 118 x 22.6 x 3.0 m, computational methods were widely used, which made it possible to "compensate" additional double bottom and double sides; so the carrying capacity is up to 6000 t with a draught 2.75 m. This is definitely a record for inland navigation vessels.
The carrying capacity is 4590 t at draught 2.20 m, and 3560 t at draught 1.80 m.
Years ago the world's first oil barges set the same records, they also had a very long and flat hull design with a minimum weight of the hull. In 1885, they were designed and built in Tsaritsyn and Saratov by an outstanding Russian engineer Vladimir Grigorevich Shukhov.
New barges are intended for transportation of oil with a flash point of 60 degrees and above; the main cargo is masut through the Belaya River and the Volga River, including reservoirs.
Therefore, the class of the Russian River Register is O 2.0.
As the tug-pushers are supposed to be the same "Ural" / "Volgar" type ones (at the first stage).
For information, old "Belskaya" type barges of the P-27 prj. with river class "P" in the initial single-hull version at draft of 1.80 m took on board 2,960 t of cargo, and at a maximum draft of 2.60 m took onboard 4590 t.
So one may observe an increase in the abilities of new ROB20 barges, both in capacity of transported cargo and in the vessel's class, plus the "double-hull" construction as a basic criterion.
The keel of the lead ROB20 vessel (building No. 4101) "Belmaks 1" was laid down on 22.11.2017. She was launched 19.04.2018. Vessel was accepted for operation on 17.05.2018.
The keel of the second vessel (building No. 4102) "Belmaks 2" was laid down on 30.11.2017. She was launched 22.05.2018. Vessel was accepted for operation on 31.05.2018.
The keel of the third vessel (building No. 4103) was laid down on 20.12.2017. She was launched 07.06.2018. Vessel was accepted for operation on 29.06.2018.
The keel of the fourth vessel (building No. 4104) "Belmaks 4" was laid down on 19.01.2018. She was launched 05.07.2018. Vessel was accepted for operation on 16.07.2018.
The keel of the fifth vessel (building No. 4105) "Belmaks 5" was laid down on 26.03.2018. She was launched 26.03.2018. Vessel was accepted for operation on 31.07.2018.
The keel of the sixth vessel (building No. 4106) "Belmaks 6" was laid down on 29.03.2018. She was launched 15.08.2018. Vessel was accepted for operation on 20.08.2018.
The keel of the seventh vessel (building No. 4107) "Belmaks 7" was laid down on 26.04.2018. She was launched 24.08.2018. Vessel was accepted for operation on 29.08.2018.
The keel of the eighth vessel (building No. 4108) "Belmaks 8" was laid down on 26.07.2018. She was launched 17.04.2019. Vessel was accepted for operation on 29.04.2018.