The third RST27M oil/chemical tanker "Balt Flot 18" (building No. 02026) of Volgo-Don Max class of deadweight 7900 t is put into operation
On 28.11.2017 Nizhniy Novgorod "Krasnoe Sormovo" Shipyard (general director Nikolay Zharkov) put into operation the third RST27M oil/chemical tanker "Balt Flot 18" (building No. 02026) of Volgo-Don Max class of deadweight 7900 t.
Vessel is built for BF Tanker Shipping Company (Dmitriy Olerskiy is a general director).
The customer of the first five vessels is the State Transport Leasing Company.
Project RST27 was designed by Marine Engineering Bureau.
In comparison with RST27, the chemical tanker of new project RST27M has an increased marine function:
• the deadweight is 7902 t for maximal draught of 4.60 m (RST27 prj. actually has deadweight 7072 t), which is more by 880 t;
• the capacity of cargo tanks is worked out for transportation of oil products of the Caspian region and is increased by constructing higher trunk up to 8970 m³ (RST27 has 8100 m³), i.e. addition is 870 m³;
• three types of cargo (RST27 has two types of cargo).
Table. Evolution of the projects of RST27 based oil/chemical tankers
|Design Dw at maximal draught, t||7875||6980||+895|
|Cargo tanks capacity, m³||8970|
transportation of oil products from Caspian region is foreseen capacity increasing due to constructing higher trunk
|Number of cargo types||3|
greatly increased the list of transported cargoes
Russian Maritime Registry of Shipping class notation is - KM Ice1 R2 AUT1-ICS VCS ECO-S OMBO Oil tanker /Chemical tanker type 2 (ESP).
As other river-sea going MEB tankers, RST27M vessels use full-circle rudder propellers as single movement and manoeuvre unit. They have increased trunk and use submersible cargo pumps. They have no longitudinal bulkhead in CL and no framing in cargo tanks.
Vessels satisfy dimensions of the Volga-Don Canal and Volga-Baltic Way. Overall vessel length is of 140.85 m, breadth is of 16.6 m, depth is of 6.0 m. Vessels belong to "Volgo-Don Max" class.
Special requirements of the Russian and world petroleum companies, additional ecological RS limitations of "ECO PROJECT" (ECO-S) class were taken into consideration during designing.
Vessels are assigned for transportation of oil and oil products with a density of 0.7 to 1.015 t / m³, as well as harmful liquid substances in bulk, including those requiring heating to temperature of 60°C, without restriction on the flash point.
Three types of cargo are transported in one voyage.
Vessel can transport an expanded list of other liquid cargo in addition to oil and oil products:
• Castor oil;
• Cocoa butter;
• Coconut oil;
• Corn oil;
• Cotton seed oil;
• Groundnut oil;
• ILLipe oil;
• Linseed oil;
• Mango kernel oil;
• Olive oil;
• Palm kernel oil;
• Palm kernel olein;
• Palm kernel stearin;
• Palm mid-fraction;
• Palm oil;
• Palm olein;
• Palm stearin;
• Rapeseed oil;
• Rice bran oil;
• Safflower oil;
• Shea butter;
• Soyabean oil;
• Sunflower seed oil;
• Tung oil;
• Methyl alcohol (Methanol);
• Methyl tert-butyl ether;
• Ethyl tert-butyl ether;
• Ethylene glycol;
• Cacium lignosulphonate solution;
• Ethyl acetate;
• Hexane (all isomers);
• Octanol (all isomers);
• Sodium hydroxide solution;
• Urea/ammonium nitrate solution;
• Ethyl alcohol;
• Isopropyl alcohol;
• Diethylene glycol;
Total capacity of six cargo tanks and two slop ones is of 8970 m³ (at 98% filling), deadweight is 7902 t (after inclining test) at marine draught of 4.60 m. Deadweight is 5363 t for river draught of 3.60 m. Cruising speed is of 10.5 kn.
It should be noted that despite a slight increase in the light weight of the vessel, the actual river deadweight is kept almost the same as at RST27 (5363 t for RST27M against 5420 t for RST27), therefore the traditional tasks on inland waterways will be decided by new vessels no worse than the famous original project RST27.
Cargo system provides simultaneously transportation of 3 types of cargo. Cargo pumps capacity is 6 x 200 m³/h. Two auxiliary steam boilers (capacity 2.5 t/h each) and two recycling steam boilers (capacity 0.45 t/h each) are installed onboard.
The heating system provides keeping the temperature 60°C of the transported cargo during the voyage (while outside temperature is -23°C) and also heating the cargo from 50 to 60°C during 48 hours (for oil products). The heating system provides keeping the temperature 45°C of the transported cargo during the voyage of 45°C (while outside temperature is -23°C) and also the heating the cargo from 45 to 65°C during 96 hours (for vegetable oils).
Two medium-speed diesels (main engine) of 1200 kW each use heavy fuel oil with viscosity IFO380. There is 230 kW bow thruster.
Electrical plant consists of three 292 kW diesel-generators and emergency-staying 136 kW diesel-generator.
Crew consists of 12 persons (14 places + pilot).
Autonomy is of 20/12 days (sea/river).
Keel of the RST27M lead vessel "Balt-Flot 16" (building No. 02022) was laid down on 25.01.17. She was launched on 21.07.17 and put into operation on 06.09.17.
Keel of the second vessel "Balt-Flot 17" (building No. 02025) was laid down on 15.03.17. She was launched on 08.09.17 and put into operation on 13.10.17.
Keel of the third vessel "Balt-Flot 18" (building No. 02026) was laid down on 25.04.17. She was launched on 23.10.17 and put into operation on 28.11.17.
Keel of the fourth vessel "Balt-Flot 19" (building No. 02027) was laid down on 27.06.17.
Keel of the fifth vessel "Balt-Flot 20" (building No. 02028) was laid down on 18.08.17.